TFT's PRO/pak foam injection and application system is the ideal choice for rapid vapor suppression with any Class A, AFFF or Alcohol Resistant foam concentrate.
Everything you need is contained in one package that attaches to the end of your 1"(2.5 cm) or 1.5" (3.8 cm) fire hose. The PRO/pak has a high impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used. A large, easy-open fill port has an indicator to show the type of liquid in the tank. Flow is controlled by a twist grip valve that also functions as a carrying handle.
With three different quick connect nozzles included, the PRO/pak system is capable of producing low or medium expansion finished foam, while operating at low inlet pressures.
Rapid Suppression Foam System That Is Rugged, Compact and Lightweight
Works with any Class A, AFFF or Alcohol Resistant Foam Concentrates
Inlet Pressures from 40 to 500psi, (3 to 14 bar) with a Nominal Flow of 12gpm at 100psi (45 l/min at 7 bar)
NH (Angled Coupling)
U-B PRO/pak Storage Bracket - is used to mount to horizontal or vertical surfaces. Adjustable quick release storage strap included. 12" x 11.5" x 14.75" $88.00
U-LX12 Low Expansion Nozzle - can be used with either Class A or B foam solutions. Reach is slightly less than the straight stream. It should be used on Class B fires for extinguishment and Class A fuels to soak the fuel with a wet foam solution. $51.00
U-MX12 Medium Expansion Nozzle - produces the greatest expansion ratios. It should be used on Class B fuels for vapor suppression and Class A fuels when a longer lasting insulating layer of drier foam is desired. $115.00
Discharge Hose - for adding length between the PRO/pak and the nozzle for maneuverability. Maximum distance is 25 feet. Quick connect 3/4" hose has a 300psi pressure rating. U-HS $74.00 U-HS6 $77.00 U-HS12 $82.00 U-HS25 $97.00
U-SS12 Straight Stream Nozzle - for Class A foam solutions. Foam expansion will be negligible. It should be used where maximum reach or penetration is desired.
U-PN12 PRO/pak Piercing Nozzle - Six jets distribute the flow in a 360° pattern. Foam expansion is negligible. Flow rate is 12 gpm at 100psi inlet pressure to the PRO/pak. The nozzle is 42" long with a quick-connect coupling. $176.00